Untitled Document

Oil Removing Agent EDK308

Oil removing agent EDK308 is especially for wiping off the mix oil strongly from the Polyester, the polyamides, the cotton, the staple rayon, and the cospinning fabric etc. EDK308 can easy to wipe off the all kind of oil, the waxiness, the paste, and other dirt, the EDK308 have the effect of dispersing, cleaning, wetting, emulsification .At the same time.EDK308 has a good effect for scouring & penetrating, can be used as a scouring agent or a abstergent, that can save the cost

Pre-treatment Products for Knitting fabric and yarn as Oil Removing Agent
Trade Name: FORASIN EDK308


  • EDK308 can easy to wipe off the all kind of oil, the waxiness, the paste, and other spot
  • Can be used as a scouring agent in pretreatment, cleaning agent after dyeing or printing that can save the cost
  • It is good abstergent after dyeing or pretreatment for the machine oil and the oil dirt
  • EDK308 can resolve easily the dyeing problems because of not wiping off the all kind of oil, the waxiness, the short thickeners, and other dirt. The EDK308 has the effect of dispersing, cleaning, wetting, emulsification
  • EDK308 is good consistent with other textile auxiliaries
  • Low foam, wipe off the dirt strongly, prevent the dirt from adsorbing again
  • Stability in hard water, resistant alkali goodly


  Composition Especial non-ionic surfactant
  Appearance Colorless transparent liquid
  lonicity Non-ion
  Ph range 6.0-8.0(100%)
  Solubility Soluble in water at normal temperature
  Environmental APEO Free; LAS Free


It was suitable used for pre-refining, bleaching and after-washing; according different process, the suggest dosage as below:
  EDK3080.3-1.0g/l (batch process)
  EDK308 1-3g/l (Continuous process)
  EDK308 has a better effect if it working in alkali or acid condition. So the recipe suggest to add in process such as
  Calcined soda 1-3g/l
  Glacial acetic acid 0.3-0.6g/l

    1. Chemical fibre alkali or acid condition for oil removing
    #1 #2
  EDK308 0.3-1.0 g/l 0.3-1.0 g/l
  Na2CO3 1-3g/l /
  Glacial acetic acid / 0.3-0.6 g/l
  EF580 1.0-2.0 g/l 1.0-2.0 g/l
  Bath ratio 1 8-12 1:  8-12

Add the chemicals, heating up the temperature from 1-2oC min to 80-98oC, keep the temperature 30-20min, and cold down to 60oC, discharging solution, and the bleaching at
60-70oC, then, it could come to next process.

    2. Former grey (cloth) washing
  In the adverse current washing machine, use DK308 0.5-1% (for knitting), adjust the PH to 8.5-9.5 with calcined soda; deal with 30-60 min when the temperature get to 50-55.

   3. Cellulose fibre and its cospinning to refining process
  EDK308 0.3~0.5g/l
  EF580 1.0-2.0g/l
  NaOH 1.0-3.0g/l
  Calcined Soda 2.0-4.0g/l
  CG300 0.5-1.0g/l
  H2O2 (27.5%) 3-8g/l
  Bath ratio 1 8-12

Add these chemical when the temperature below 50oC, raise the temperature from 1-2oC/ min to 95-98 oC, keep for45-60min. Cold to 60-70oC, then discharging solution, and bleaching at 60-70oC.
If there is necessary, please neutralization first, and then come to next process.


120kgs/Drum as Non-hazardous material


180 days.